Gutter installer · Madison, MS

Gutter Services in Madison & Jackson, MS

Dun-Rite Seamless Gutters, Inc. is a gutter installer based in Madison, Mississippi. It offers eight services, all to do with gutters: new seamless aluminum and copper systems, gutter guards, cleaning, repair and replacement, commercial installation and custom downspouts, in 14 cities around Jackson.

What We Do

Which gutter service do you need from Dun-Rite?

Start with the problem you can see. Water pouring over the edge usually means cleaning, guards or larger downspouts. Drips at joints and sagging runs mean repair. A system older than 20 to 30 years usually means replacement with new seamless gutters. Each card opens a page with prices and specifics.

Brick and stucco two-story home with dark gutters and downspouts along the roofline

Seamless Gutter Installation

5-inch and 6-inch K-style aluminum gutters formed at your house from one coil, so no run has a joint in the middle.

  • .032 gauge aluminum standard
  • Hidden hangers every 24 inches
  • Old gutters hauled away
Seamless Gutter Installation details
Sample gutter profiles in dark grey, red, white and blue finishes

Aluminum Gutters

Rust-proof aluminum in .032, .040 and .050 gauge, with nine stocked baked-enamel colors and custom colors on order.

  • Nine colors in stock
  • Three gauges available
  • Will not rust
Aluminum Gutters details
Copper gutter and a standing-seam copper awning on a red brick home

Copper Gutters

Copper gutters with every seam hand-soldered, in half-round, K-style and ogee profiles, plus standing-seam copper accents.

  • Seams soldered, never riveted
  • 16, 20 and 24 oz copper
  • Awnings and dormer caps
Copper Gutters details
Gloved hand fitting a perforated white guard panel over a gutter at the shingle edge

Gutter Guards & Leaf Protection

Fine mesh for pine straw, large-hole screen for oak leaves, or foam inserts, fitted to new or existing gutters.

  • Three guard types priced
  • Fits gutters you have
  • Most retrofits take hours
Gutter Guards details
Gloved hand lifting wet autumn leaves out of a white gutter

Gutter Cleaning

Debris removed by hand, every downspout flushed, and a written report with photos sent the same day.

  • Hand-cleaned, not blown out
  • Downspouts flushed clear
  • Photo report after each visit
Gutter Cleaning details
Installer on an extension ladder working at the eave of a house, seen from below

Gutter Repair & Replacement

Sagging runs, leaking corners and gutters pulled off the fascia repaired by the section, or the whole system replaced.

  • Repairs priced per section
  • Storm claim paperwork prepared
  • Replacement when repair fails
Gutter Repair & Replacement details
Long run of dark half-round gutter under a tile roof edge

Commercial Gutters

7-inch and 8-inch gutters and high-flow downspouts for offices, retail centers, multi-family and industrial buildings.

  • 7-inch and 8-inch profiles
  • One point of contact
  • AIA billing on request
Commercial Gutters details
Installer strapping a dark round downspout to a stucco wall below the eave

Custom Downspouts

Round, 3x4 and 4x5 downspouts sized to the roof area they drain, with underground drain tie-ins where the yard needs them.

  • Sized to roof area
  • Round and rectangular profiles
  • Underground tie-ins available
Custom Downspouts details

Side by side

What does each Dun-Rite gutter service cost?

Dun-Rite Seamless Gutters, Inc. prices new systems by the home, copper and guards by the linear foot, cleaning by the visit and repairs by the section. The ranges below are the company's own typical figures; a written quote follows an on-site measurement, and the estimate visit is free.

All eight services with Dun-Rite's typical price and timing.
ServiceTypical priceTypical time on siteService life or interval
Seamless gutter installation$1,200 – $3,500 per home1 day; 1 – 2 for two stories20 – 30 years
Aluminum gutters$1,200 – $3,500 per home1 day; 1 – 2 for two stories20 – 30 years
Copper gutters$25 – $40 per linear footQuoted per project50 to 100+ years
Gutter guards$3 – $14 per linear foot2 – 4 hours for a retrofit5 to 15+ years by system
Gutter cleaning$150 – $300 per visitOne visitTwice a year for most homes
Gutter repair and replacement$150 – $600 per section; replacement from $1,200Estimate the same dayReplacement: 25-year material warranty
Commercial guttersQuoted from drawingsPhased with the buildQuoted per project
Custom downspoutsDrain tie-ins $300 – $800 per runQuoted per projectSized to roof area

Common to every job

What is the same on every Dun-Rite job?

Four things are the same on every Dun-Rite job: the estimate is measured on site and written down, the owner inspects it, new installations carry two warranties, and there is no travel fee anywhere in the service area.

  • Mark Dungan personally inspects every estimate.
  • New installations carry a 25-year manufacturer warranty on materials and a 2-year labor warranty.
  • Removal and disposal of old gutters is included in installation quotes.
  • The 14 cities in the service area are all covered without trip charges.

For background on the company and its credentials, see about Mark Dungan and Dun-Rite.

Two-story stucco home with copper gutters along each roofline
Copper gutters along both rooflines of a two-story stucco home.

Written estimates

Not sure which service you need?

Describe what the gutters are doing and Dun-Rite will tell you whether it is a cleaning, a repair or a replacement. The office answers Mon–Fri 8 AM – 5 PM · Sat–Sun Closed.

(601) 750-1800

Call Now Free Estimate

Request a written estimate